Isys i/O
™
WiFi Touchpanel
Crestron
TPMC-10
Analog Input & Output Signal Descriptions (continued)
TOUCHPANEL
SIGNAL NAME
AND TYPE
VT Pro-e
JOIN TYPE
VT Pro-e
OBJECT
DESCRIPTION
Analog
Scrolling
Text Join
Border,
Button,
Legend,
Text,
Gauge,
Slider
Selects the top line of text to be displayed.
Valid analog values depend on the
Scrolling Offset selected in VT Pro-e,
beginning at 0d. The Scrolling Offset
determines the top-most entry (first line) to
be displayed and scrolled.
For instance, if there are 10 lines of text
and Scrolling Offset is at 3, then the fourth
line will be seen when the signal is
initialized to 0d, and the first three lines will
never be visible.
Separate from the above, VT Pro-e also
provides a "Scrolling Limit Enabled"
selection.
For Scrolling Limit Enabled, regardless of
the analog value sent, it will only function
between valid ranges.
If there are nine items in the list, and the
object shows two items at a time, setting
the analog value to 7d will display the 8th
and 9th lines. Sending any other value
higher then 7d will yield no change in the
display.
If Scrolling Limit Enabled is not selected,
then higher values for the analog will
change the display.
Here, if there are nine items in the list, and
the object shows two items at a time,
setting the analog value to 7d will display
the 8th and 9th lines. Sending higher
values will show additional lines, even if
there is no text. Thus, a value of 8d would
display the 9th line and a blank line under
it; 9d would display two blank lines.
Analog inputs:
<
an_fb1
> through
<
an_fb4000
>
(continued)
Analog
Feedback
Join
Gauge
Sets the value of the indicator on the
Gauge object. The indicator direction
(top/bottom, left/right) and style (shaded or
line) depends on the format selected in VT
Pro-e.
The indicator can represent signed or
unsigned values, depending on the format
selected in VT Pro-e.
(continued on next page)
28
•
Isys i/O
™
WiFi Touchpanel: TPMC-10
Operations Guide - DOC. 6284B