Crestron
TPMC-10
Isys
i/O
™
WiFi Touchpanel
Industry Compliance
As of the date of manufacture, this unit has been tested and found to comply with
specifications for CE marking and standards per EMC and Radiocommunications
Compliance Labelling.
NOTE:
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
NOTE:
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. The equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
■
Reorient or relocate the receiving antenna.
■
Increase the separation between the equipment and transceiver.
■
Connect the equipment into an outlet on a circuit different from that to which the
transceiver is connected.
■
Consult the dealer or an experienced radio/TV technician for help.
Setup
Applying Power
The TPMC-10 can be powered via its internal battery, or via the supplied external
power supply. The power supply can be connected directly to the TPMC-10 or, if the
touchpanel is docked in the optional TPMC-10-DS docking station (sold separately),
it can be connected to the docking station.
NOTE:
Before using the TPMC-10 for the first time, charge the internal battery for
at least five hours, using the power supply provided.
It takes the TPMC-10 about two hours to recharge while not in use, and about four
hours while in use. A fully charged battery can provide up to four hours of use
depending upon screen brightness setting and the use of optional PCMCIA card
accessories.
CAUTION:
Removing the battery can cause the loss of any unsaved file changes.
To prevent loss of data, connect the power supply before removing the battery.
Operations Guide – DOC. 6284B
Isys i/O
™
WiFi Touchpanel: TPMC-10
•
9