Isys i/O
™
WiFi Touchpanel
Crestron
TPMC-10
Analog Input & Output Signal Descriptions (continued)
TOUCHPANEL
SIGNAL NAME
AND TYPE
VT Pro-e
JOIN TYPE
VT Pro-e
OBJECT
DESCRIPTION
Analog
Feedback
Join
(continued)
Timer
(continued)
Signed values for the HH:MM:SS format
can range from -32767s (-09:06:07) to
+32767s (+09:06:07).
Unsigned values for the MM:SS format
can range from 0s to 5999s (99:59).
Signed values for the MM:SS format can
range from -5999s (-99:59) to +5999s
(+99:59).
Analog
Feedback
Join
Clock
Sets the time offset. Decimal values alter
the time being displayed by one minute.
The analog value is a signed number; if no
offset is selected in VT Pro-e, 0d will show
the current control system time. A value of
60d will show one hour ahead. A value of
-60d will show one hour behind.
If a clock offset is selected in VT Pro-e too,
the object uses both values to determine
the offset. That is, if the offset is set to one
hour forward in VT Pro-e and the Analog
Feedback Join value is 120d, then the
clock object will display three hours ahead.
Analog inputs:
<
an_fb1
> through
<
an_fb4000
>
(continued)
Analog
Feedback
Join
Animation
Selects the frame to be displayed on the
Animation object.
The range of valid values equals the
number of frames in the animation,
starting at 0d.
(Animation can be controlled by Numeric
Keypad and Oscillator symbols. Refer also
to the Crestron module,
Animator.cmc
.)
30
•
Isys i/O
™
WiFi Touchpanel: TPMC-10
Operations Guide - DOC. 6284B