The specific patents that cover Crestron products are listed at
Crestron, the Crestron logo, Auto-Locking, Core 3 UI, Cresnet, Crestron Fusion, Crestron e-Control, Crestron Mobile, Crestron Toolbox,
DigitalMedia, DigitalMedia 8G, DigitalMedia 8G+, DM, DM 8G+, e-Control, Fusion RV, QuickSwitch HD, and RoomView are either trademarks or
registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. iPad and iPhone are either trademarks or registered
trademarks of Apple Inc. in the United States and/or other countries. Blu-ray Disc is either a trademark or registered trademark of the Blu-ray Disc
Association (BDA) in the United States and/or other countries. Dolby and Dolby Digital are either trademarks or registered trademarks of Dolby
Laboratories in the United States and/or other countries. DTS, DTS-ES, and DTS 96/24 are either trademarks or registered trademarks of DTS Inc. in
the United States and other countries. Android is either a trademark or registered trademark of Google Inc. in the United States and/or other countries.
HDMI and the HDMI logo are either trademarks or registered trademarks of HDMI Licensing LLC in the United States and/or other countries.
Windows is either a trademark or registered trademark of Microsoft Corporation in the United States and/or other countries.
HDBaseT and 5Play are
either trademarks or registered trademarks of Valens /Semiconductor Ltd. In the United States and/or other countries. Other trademarks, registered
trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron
disclaims any proprietary interest in the marks and names of others.
Crestron is not responsible for errors in typography or photography.
This document was written by the Technical Publications department at Crestron.
©2013 Crestron Electronics, Inc.
Regulatory Compliance
This product is Listed to applicable UL Standards and requirements by Underwriters Laboratories Inc.
As of the date of manufacture, the DMPS-100/200/300-C/300-C-AEC has been tested and found to comply
with specifications for CE marking and standards per EMC and Radiocommunications Compliance Labelling.
Federal Communications Commission (FCC) Compliance Statement
CAUTION:
Changes or modifications not expressly approved by the manufacturer responsible for
compliance could void the user’s authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna
•
Increase the separation between the equipment and receiver
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
•
Consult the dealer or an experienced radio/TV technician for help
Industry Canada (IC) Compliance Statement
CAN ICES-3(B)/NMB-3(B)