Crestron
DMPS-100/200/300-C/300-C-AEC
DigitalMedia Presentation System
Operations Guide – DOC. 7219D
DigitalMedia Presentation Systems: DMPS-100/200/300-C/300-C-AEC
•
41
Input Signal Type
The
Input Sig. Type
section of the “Audio Setup” menu is used to set the input signal
types to the
AUD IN 1
through
AUD IN 5
connectors as
Auto
,
HDMI
,
or
Analog
.
NOTE:
For inputs 3, 4, and 5, there is no audio output if the audio input type is set
to HDMI, and the video input type is set to something other than HDMI.
Access Input Signal Types
To access input signal types:
1.
Access the “Audio Setup” menu as described on page 40. The words
Input
Sig. Type
are displayed.
“Audio Setup” Menu
Audio Setup
Input Sig. Type
j
2.
Press
ENTER
to display the “Sel. Input Type” menu.
3.
To return to the “Audio Setup” menu, press
MENU
.
Set the Signal Type
for Each Input
To set the signal types:
1.
Access the “Sel. Input Type” menu as described above.
“Sel. Input Type” Menu
Sel. Input Type
1:HDMI 1
j
2.
Press the
k
and
j
buttons to select between
1:HDMI 1
,
2:HDMI 2
,
3:HDMI/VGA 3
,
4:HDMI/VGA 4
, and
5:HDMI/VGA/COMP
signal source
types.
NOTE:
Input 5
is not present on DMPS-100-C.
3.
Press
ENTER
to confirm the selection. The LCD displays the “Select Input
1 Type” menu.
“Select Input 1 Type” Menu
Select Input 1 Type
*Auto
j
4.
For each input type, press the
k
or
j
buttons to select between
Auto
,
HDMI
, and
Analog
signal types. The
5:HDMI/VGA/COMP
signal source
type menu offers a fourth signal type:
S/PDIF
. Press
ENTER
to confirm
the selection.
5.
Repeat the above procedures to select the desired input signal type for each
input source type.
6.
To return to the “Sel. Input Type” menu, press
MENU
.
