Crestron DMPS-100 Operation Manual Download Page 43

Page: 43 / 76

Crestron

DMPS-100/200/300-C/300-C-AEC

DigitalMedia Presentation System

Operations Guide – DOC. 7219D

DigitalMedia Presentation Systems: DMPS-100/200/300-C/300-C-AEC

•

TCP/IP

Ethernet Communication

PC Running

Crestron Toolbox

LAN

DMPS-100/200/300-C

The DMPS-100/200/300-C connects to PC via Ethernet:

Establish communication between DMPS-100/200/300-C and PC.

Confirm Ethernet connection between DMPS-100/200/300-C and PC. If

connecting through a hub or router, use CAT5 straight through cables with

8-pin RJ-45 connectors. Alternatively, use a CAT5 crossover cable to

connect the two

LAN

ports directly without using a hub or router.

Use the Device Discovery Tool in Crestron Toolbox to find the IP address

of the DMPS-100/200/300-C. The tool is available in Toolbox version

1.15.143 or later.

Use the Address Book in Crestron Toolbox to create an entry for the

DMPS-100/200/300-C with the DMPS-100/200/300-C’s TCP/IP

communication parameters.

Display the “System Info” window (click the

icon) and select the

DMPS-100/200/300-C entry from the Address Book or the Address Book

drop-down list.

Use Crestron Toolbox to create the DMPS-100/200/300-C IP table.
a.

Select

Functions | IP Table Setup

Add, modify or delete entries in the IP table. The

DMPS-100/200/300-C can have only one IP table entry.

A defined IP table can be saved to a file or sent to the device.

When using the DMPS-100/200/300-C as a “slave”, edit the “master”

control system’s IP table to include an entry for the DMPS-100/200/300-C.

The entry should list the DMPS-100/200/300-C’s IP ID (specified on the

DMPS-100/200/300-C’s IP table) and its IP address.

Firmware

Firmware files may be distributed from programmers to installers or from Crestron

to dealers. Firmware upgrades are available from the Crestron Web site as new

features are developed after product releases. One has the option to upload and

upgrade via the Crestron Toolbox. For details on uploading and upgrading, refer to

the Crestron Toolbox help file.
For details on upgrading, refer to the Crestron Toolbox help file.
Check the Crestron Web site to find the latest firmware. (New users must register to

obtain access to certain areas of the site, including the FTP site.)
Upgrade DMPS-100/200/300-C firmware via Crestron Toolbox:

Establish communication with the DMPS-100/200/300-C and display the

“System Info” window.

Select

Functions | Firmware…

to upgrade the DMPS-100/200/300-C

firmware.

Summary of Contents for DMPS-100













































































Search results

Summary of Contents for DMPS-100

Reviews:

Related manuals for DMPS-100

Brands by name

Popular brands

Crestron DMPS-100, Operation Manual

Search results

Summary of Contents for DMPS-100

Reviews:

Related manuals for DMPS-100

Brands by name

Popular brands