62 • DM NVX® 4K60 4:2:0 Network AV Encoders and Decoders
Product Manual — Doc. 9219A
Refer to the configuration guidelines that follow.
Input Routing
NOTE:
When changes are made in the Input Routing section, the changes are saved
automatically.
Audio
l
Active Audio Source: Displays the active audio source as one of the following: Audio
Follows Video, Input 1 (encoder only), DM NAX (AES67) Audio, Primary Stream Only
(decoder only), or No Audio Selected
l
Audio Source: In the drop-down list, select the desired audio source:
o
Audio Follows Video: The audio signal is always switched with the video signal.
o
Input 1: (Encoder only) The audio signal from the input is sent to the output.
o
Primary Stream Audio: (Decoder only) The audio signal is combined with the video
from the incoming network video stream.
o
DM NAX (AES67) Audio: The audio signal is independent of the primary audio/video
stream.
Stream Routing (Decoder Only)
NOTE:
When changes are made in the Stream Routing section, the changes are saved
automatically.
DM NAX (AES67) Audio Follows Video: By default, DM NAX (AES67) Audio Follows Video is
disabled (the toggle switch is set in the Off position). To enable the functionality, set the toggle
switch in the On position.
When DM NAX (AES67) Audio Follows Video is enabled, DM NAX (AES67) audio is always
switched with the video.
Inputs/Outputs: The table provides cells identifying the decoder and the subscribed encoders.
NOTE:
The Inputs/Outputs table appears only when encoders have been subscribed to the
decoder. If no encoders have been subscribed, a message appears indicating that there are no
active subscriptions. In order to route video, subscribe encoders to the decoder in the
Subscriptions section of the Settings tab.
In the Inputs/Outputs table, the cell for the decoder is named OUTPUT 1 by default and is shaded
blue. Cells for the DM NVX encoders are shaded green. Icons for each encoder represent
streams: one DM NAX (AES67) audio stream (
) and one primary A/V stream (
). When the
stream icons are not selected, the icons are shaded gray. When the icons are selected, the DM
NAX (AES67) Audio icon turns pink and the Primary A/V icon turns purple.
