44 • DM NVX® 4K60 4:2:0 Network AV Encoders and Decoders
Product Manual — Doc. 9219A
Settings Tab - System Setup, Point-to-Point Control
Refer to the configuration guidelines that follow.
l
Point-to-Point Status: Indicates the status of point-to-point connectivity between a DM
NVX encoder and DM NVX decoder as Active or Inactive.
l
Point-to-Point Mode: In the drop-down list, select either of the following:
o
Auto: (Default setting) A 1000BASE-T port of a DM NVX encoder detects a direct
connection to a DM NVX decoder or a connection to a 1000BASE-T switch. Similarly,
a 1000BASE-T port of a DM NVX decoder detects a direct connection to a DM NVX
encoder or a connection to a 1000BASE-T switch. If a direct connection between an
encoder and decoder is detected, point-to-point mode is automatically enabled.
When point-to-point mode is enabled, no additional configuration is required for the
encoder or decoder to operate in point-to-point mode.
o
Disable: Disables point-to-point mode