48 • DM NVX® 4K60 4:2:0 Network AV Encoders and Decoders
Product Manual — Doc. 9219A
In the Advanced section, configure the following stream settings:
NOTE:
When changes are made in the Advanced section, the changes are saved automatically.
l
Auto Initiation: By default, Auto Initiation is enabled (the toggle switch is set in the On
position). The stream automatically starts when the proper stream configuration settings
are assigned.
To disable Auto Initiation, set the toggle switch in the Off position. To start the stream,
press the Start button. To stop the stream, press the Stop button.
l
Custom Ports: By default, Custom Ports is disabled (the toggle switch is set in the Off
position). To enable Custom Ports, set the toggle switch in the On position.
When Custom Ports is enabled, the following port numbers can be changed as required
using the scrollable text boxes:
o
RTSP Port: Enter an RTSP port number. Valid values range from 1 to 65535.
The default RTSP port number is 554.
o
TS Port: For a DM NVX encoder, enter a TS (transmit stream) UDP port number.
The value must be an even number ranging between 2 and 65534. The default TS
port number is 4570.
For a DM NVX decoder, the TS port number is read only and is always set to the TS
port number of the encoded stream.
