82 • DM NVX® 4K60 4:2:0 Network AV Encoders and Decoders
Product Manual — Doc. 9219A
n
Power Off: SS Only
n
Custom (default setting)
If a setting other than Custom is selected, click the Test button to test the
command.
o
For Power On using CEC, select one of the following in the Command drop-down
list:
n
Power On: RCP and IVO (Remote Control Passthrough and Image View On)
n
Power On: RCP
n
Power On: Image View On
n
Custom (default setting)
If a setting other than Custom is selected, click the Test button to test the command.
l
If Custom is selected as the command, configure the following:
o
Command String: In the text box, enter a valid command string for CEC.
The maximum length is 128 characters.
NOTE:
If the format of the command is to be selected as Hex in the Format drop-
down list discussed below, the Hex command string must be entered as pairs of
characters separated by a space. Valid characters are 0-9, a-f, and A-F. An
example of a command string is as follows:
58 00 0D 0A
o
Terminator: In the drop-down list, select one of the following to append to the
command:
n
None: No terminator (default setting)
n
CR: Carriage return
n
LF: Line feed
n
CR_LF: Carriage return followed by a line feed
o
Format: In the drop-down list, select Hex (hexadecimal) or ASCII. The default setting
is Hex.
Click the Test button to test the custom command.
l
Input Control: (Applicable to Power On only) By default, Input Control is disabled (the
toggle switch is set in the Off position). To enable Input Control, set the toggle switch in
the On position.
When enabled, Input Control allows an additional command to be sent after the Power On
command is sent. The Input Control command ensures that the proper HDMI input is
selected on the display device.
