Product Manual — Doc. 9219A
DM NVX® 4K60 4:2:0 Network AV Encoders and Decoders • 45
Stream
To configure stream settings, open the Stream section of the Settings tab.
The Stream section varies depending on whether the DM NVX device is an encoder or decoder.
Settings Tab - Stream (Encoder Shown)
Settings Tab - Stream (Decoder Shown)
Refer to the configuration guidelines that follow.
l
Multicast Address: (Encoder only) Enter the primary multicast IP address using an even-
numbered IP address ranging between 224.0.2.0 and 239.255.255.254 excluding
239.255.255.250. The stream is sent to this multicast address.
l
Device Name: Enter a name for the DM NVX device. By default, the device name is the
model name followed by a hyphen and the MAC address of the device.
l
Stream Location: For a DM NVX encoder, Stream Location is read only and displays the
RTSP (Real Time Streaming Protocol) URL of the encoder.
For a DM NVX decoder, enter the RTSP URL to which the decoder can connect. The RTSP
URL must not exceed 255 characters.