42 • DM NVX® 4K60 4:2:0 Network AV Encoders and Decoders
Product Manual — Doc. 9219A
IP Table
In the IP table, add up to 16 control systems by doing the following:
1. Click the Add button.
2. Assign the following settings:
l
IP ID: In the text box, enter the IP ID of the DM NVX device. Valid values range from
03 to FE in hexadecimal notation.
l
IP Address/Hostname: In the text box, enter the IP address or hostname of the
control system.
l
Room ID: (Optional) Enter the room ID.
NOTE:
To delete a control system listed in the table, select the corresponding check box and
click the Remove button. To select and delete all control systems, select the topmost check
box in the first column of the table and click the Remove button.
Fan Control (DM-NVX-D200 Only)
Fan control enables the fan to be turned off automatically or to always remain on. In addition,
the current operating mode of the fan can be viewed.
In the Settings tab, configure fan control or view the operating mode in the Fan Control section
of System Setup.
Settings Tab - System Setup, Fan Control (DM-NVX-D200 Only)
Refer to the configuration guidelines that follow.