Product Manual — Doc. 9219A
DM NVX® 4K60 4:2:0 Network AV Encoders and Decoders • 43
l
Fan Mode: In the drop-down list, select either of the following:
NOTE:
When a change is made to Fan Mode, the change is automatically saved.
o
Auto: (Default setting) The fan automatically turns off when the following two
conditions exist:
1. No video stream is present.
2. The internal temperature of the device does not exceed the normal operating
range.
o
Always On: The fan runs continuously regardless of video stream status and internal
temperature of the device.
l
Fan Status: Indicates either of the following:
o
Full On: The fan is running.
o
Off: The fan is not running.
Point-to-Point Control
Point-to-point control specifies whether a point-to-point connection between a DM NVX
encoder and DM NVX decoder is to be automatically detected. In addition, the status of the
point-to-point connection can be viewed.
NOTES:
l
The DM-NVX-E20 can be connected directly to a DM-NVX-D20, DM-NVX-D200, or any
DM NVX 4K60 4:4:4 decoder in a point-to-point configuration.
l
The DM-NVX-D20 and DM-NVX-D200 can be connected to a DM-NVX-E20 or DM-NVX-
E10 in a point-to-point configuration.
In the Settings tab, configure point-to-point control or view the point-to-point status in the
Point-to-Point Control section of System Setup.
