Product Manual — Doc. 9219A
DM NVX® 4K60 4:2:0 Network AV Encoders and Decoders • 79
Automatic Display Power
The Automatic Display Power section of the Edit Output dialog box enables the HDMI output to
be configured so that the display device can be powered on or off automatically.
Edit Output Dialog Box - Automatic Display Power (Decoder Only, DM-NVX-D200 Shown)
Refer to the configuration guidelines that follow.
NOTE:
When a change is made to the Automatic Display Power section, the change is
automatically saved.
Automatic Power: By default, Automatic Power is enabled (the toggle switch is set in the On
position). To disable Automatic Power, set the toggle switch in the Off position.
If Automatic Power is enabled, configure the following settings:
l
Command Interface: In the drop-down list, select one of the following:
o
None: (Default setting) Specifies that no command is to be sent
o
CEC: Specifies that a CEC command is to be sent via the HDMI output
o
RS-232: Specifies that an RS-232 command is to be sent via the COM port
o
Infrared Specifies that an IR command is to be sent via the IR port
