Product Manual — Doc. 9219A
DM NVX® 4K60 4:2:0 Network AV Encoders and Decoders • 67
General
Configure or view information about the input:
l
Name: In the text box, enter the desired name of the input. The default name is INPUT 1.
l
HDCP Receiver Capability: In the drop-down list, select one of the following to control
HDCP (High-Bandwidth Digital Content Protection) support for the HDMI input:
o
Disabled: Disables HDCP, causing the HDMI input to transmit non-HDCP content
only.
o
Auto: (Default setting) Enables the HDMI input to transmit content based on the
highest HDCP level of the connected source.
o
HDCP 1.4: Sets the HDCP level to 1.4 for HDCP content transmission by the HDMI
input.
o
HDCP 2.2: Sets the HDCP level to 2.2 for HDCP content transmission by the HDMI
input.
l
Color Depth: Indicates one of the following: 8-bit Mode, 10-bit Mode, or 12-bit Mode.
l
Color Space: Indicates one of the following: Unknown, RGB, Y444, Y422, or Y420.
When a change is made to the EDID section, the change is automatically saved.
In the EDID drop-down list, select the desired EDID. If the desired EDID does not appear in the
list, refer to
to add the EDID to the list.
Click OK to save changes to the General section and close the Edit Input pop-up dialog box. If no
changes were made to the General section, click CANCEL to close the dialog box.
