Crestron
CEN-NVS100
Network Video Streamer
Camera Control Area:
In the camera control area, click one of the following
buttons to control PTZ camera functions:
•
Left:
Pans the camera to the left.
•
Right:
Pans the camera to the right.
•
Up:
Tilts the camera upward.
•
Down:
Tilts the camera downward.
•
Home:
Positions the camera to the center.
•
-
(left side of
Zoom
): Allows the camera to zoom widely.
•
+
(right side of
Zoom
): Allows the camera to zoom telescopically.
•
-
(left side of
Auto Focus
): Controls the focus near function.
•
Auto Focus:
Controls the auto focus function.
•
+
(right side of
Auto Focus
): Controls the focus far function.
In addition, PTZ functions can be controlled by selecting the desired value from the
following drop-down lists:
•
Pan speed:
Controls the range of the horizontal movement of the camera.
The greater the value, the greater is the angular movement when performing
the Left or Right functions.
•
Tilt speed:
Controls the range of the vertical movement of the camera. The
greater the value, the greater is the angular movement when performing the
Up or Down functions.
•
Zoom speed:
Controls the range of the zooming. The greater the value, the
greater is the change in the viewing angle.
Preset Function Area:
Identifies and saves the current video view as a preset
location and also sets patrol stops:
•
Preset position name:
In the text entry box, enter a short name for the
current video view, and the click
Add.
NOTE:
Entering a very long preset position name causes problems with
the positioning of the camera.
•
Dwelling time (sec):
Specifies the number of the seconds for the following:
⇒
The stop time of each preset location during auto patrol of the
camera.
⇒
The stay time at the leftmost and rightmost positions when the
camera is auto panning.
In the
Dwelling time (sec):
text entry box, enter the desired number of
seconds, and then click
Save
in the bottom center of the page to save the
setting.
•
Preset Position:
Provides a list of preset positions:
⇒
To move the camera to a certain preset position, select the desired
position from the drop-down list and then click
Go to.
⇒
To delete a certain preset position, select the desired position from
the drop-down list and then click
Delete.
Operations & Installation Guide – DOC. 6873A
Network Video Streamer: CEN-NVS100
•
49
