Network Video Streamer
Crestron
CEN-NVS100
3. In
the
Window Name
text entry box, enter a name for the window. The
name is displayed in the title bar of the window.
4. Drag
the
Sensitivity
slider to the desired percentage to set the motion
degree, that is, the endurable difference between two sequential images.
A higher sensitivity allows easier motion detection.
5. Drag
the
Percentage
slider to the desired percentage to set the space ratio of
moving objects in the monitoring window. A smaller percentage allows
easier motion detection.
6. Click
Save
to save the motion detection settings.
The graphic bar on the “Motion detection” page rises or falls depending on
the image variation:
•
A green bar indicates that the image variation is under monitoring
level.
•
A red bar indicates that the image variation is over monitoring
level. When the bar goes red, the detected window is also outlined
in red.
On the home page, the motion detection window is hidden but the red frame is
shown when motion is detected as illustrated in the sample screen below.
Motion Detection on Home Page
NOTE:
If the predefined motion detection is under privacy mask block, the
monitoring window is not triggered.
46
•
Network Video Streamer: CEN-NVS100
Operations & Installation Guide – DOC. 6873A
