Network Video Streamer
Crestron
CEN-NVS100
For information about configuring CEN-NVS100 video and audio settings, refer to
“Configuring Audio and Video Settings” on page 37.
Talk
(Not supported in CEN-NVS100 version 0100i) Clicking the
Talk
button (
)
enables talking to the camera by means of the microphone connected to the
CEN-NVS100. Clicking the button again disables the ability to talk to the camera.
Pause/Resume/Play
Clicking the
Pause
button (
) stops the streaming video temporarily. Clicking the
Resume
button (
) resumes the streaming video. Clicking the
Play
button (
)
plays the video after it has been stopped by the
Stop
button (see below).
Stop
Clicking the
Stop
button (
) stops the streaming video.
Volume
(Not supported in CEN-NVS100 version 0100i ) Clicking the
Volume
control
button (
) opens the volume control slider that allows you to adjust the volume of
the audio output.
Volume Mute
(Not supported in CEN-NVS100 version 0100i ) Clicking the
Mute
button (
)
turns off the audio. Clicking the button again turns on the audio.
Mic Volume
(Not supported in CEN-NVS100 version 0100i ) Clicking the
Mic volume
button
(
) opens the Mic volume control slider that allows you to adjust the volume of
the microphone connected to the CEN-NVS100.
Mic Volume Mute
(Not supported in CEN-NVS100 version 0100i ) Clicking the
Mic volume mute
button (
) turns off the microphone. Clicking the button again turns on the
microphone.
PTZ Custom Command Buttons
PTZ custom command buttons appear on the home page when custom commands are
configured using the
Custom Command
button on the “Camera Control”
configuration page. For additional information, refer to “Configuring Camera
Control Settings” on page 47.
20
•
Network Video Streamer: CEN-NVS100
Operations & Installation Guide – DOC. 6873A
