Creo Dolev 4press V, User Manual

Page: 59 / 121

Loading Film 43
3.
Push the tabs toward the center and lift the cover.
4.
Lift the film spool, remove it from the cassette and place it on the
table.
A different flange is attached to each side of the film spool, namely, the
left flange and the right flange (see Handling the Left Flange on page 43
and Chapter 2, Handling Cassettes and Media, Handling the Right
Flange on page 44).
Handling the Left Flange
The left flange should be situated at one of the following positions:
•
Closer to the middle of the spool if side punches are not installed (by
default, the flange is set to this position).
•
Closer the end of the spool if side punches are installed.
Left film flange on film spool (situated for no side punches)
Situate the flange
here if side punches
are installed
(29 1/2“)
Film spool