Creo Dolev 4press V, User Manual

Page: 37 / 121

Starting Up 21
2.
To turn on the imagesetter, face the imagesetter and press on the right
part of the On/Off switch (located on the top edge of the control
panel).
On/Off switch on top edge of control panel
The system beeps, and the control panel indicates the currently performed
startup stage (StartUp 1 . . . StartUp 7. Stages #8-#12 are not specifically
indicated).
After the startup procedure is completed, one of the following is indicated
on the control panel’s LCD screen:
•
STANDBY indicates that the imagesetter is ready to expose (that is,
film is already loaded, and both the loading and unloading drawers are
closed).
•
NOT READY indicates that the imagesetter is not ready to expose (for
example, film is not loaded; one of the drawers/doors is open; Startup
failed). For further information, see
Chapter 1, Control Panel on
page 24
.
Note: This information is helpful in case the imagesetter hangs during startup,
as it indicates the stage at which the problem occurred.