© Copyright 2013, Creative Playthings
MODEL MQHAR
19856-100 Rev D (05-14)
Page 30
AssEMbLy InsTRuCTIOns
sTEP 53 – front Hand Grip:
Hold one Hand Grip (CX) against the front face of the front
right post above the Access Ladder. The lower hole should
be 8" above the top of the platform.
Drill 3/16" diameter pilot holes 1" deep into the post through
the holes in the Hand Grip. Fasten using 1/4 x 1-1/2" Lag
Screws and Flat Washers.
sTEP 54 – Hand Grips Above Rock Wall:
Fit two Hand Grips (CX) above the Rock Wall as shown at
right. Drill 3/16" diameter pilot holes 1" deep and secure
each using two 1/4 x 1-1/2" Lag Screws and Flat Washers.
sTEP 55 – Hand Grips up to Lookout:
Fit two Hand Grips (CX) above the upper ladder as shown
at right. Drill 3/16" diameter pilot holes 1" deep and secure
each using two 1/4 x 1-1/2" Lag Screws and Flat Washers.
8"
3/16" Pilot Drill & 1/4" x
1-1/2" Lag Screw
3/16" Pilot Drill & 1/4" x
1-1/2" Lag Screws
3/16" Pilot Drill & 1/4" x
1-1/2" Lag Screws
CX
CX
CX
