MODEL MQHAR
19856-100 Rev D (05-14)
© Copyright 2013, Creative Playthings
Page 11
AssEMbLy InsTRuCTIOns
sTEP 1 – front Posts:
Locate two Front Posts (C) and two
Inside Posts (BA).
Fasten one Inside Post to each Front
Post using 1/4 x 2-1/2" Hex Bolt As-
semblies as shown above. Be sure
to note the orientation of the holes
on the narrow faces of the boards.
The front left post assembly uses two
Hex Bolt Assemblies and the right
front post uses three. Try to align
all of the holes along each board for
future attachments.
sTEP 2 – Middle Posts:
Locate Left Post (AR), Right Post
(AS), and two Inside Posts (BA).
Fasten one Inside Post to each Post
using 1/4 x 2-1/2" Hex Bolt Assem-
blies as shown above. Be sure to
note the orientation of the holes on
the narrow faces of the boards.
The left post assembly uses two Hex
Bolt Assemblies and the right post
uses three. Try to align all of the
holes along each board for future
attachments.
Hex bolt Assembly:
Throughout this guide a Hex Bolt Assembly consists of
one Hex Bolt, one Lock Washer, one Flat Washer and one
Weld Nut. Long Weld Nuts are used unless otherwise noted.
sTEP 3 – back Posts:
Locate the Long Inside Posts (AI), the Long
Outside Posts (AJ) and the Back Post Tops
(BA).
Assemble each post as shown above using
four 1/4 x 2-1/2" Hex Bolt Assemblies. Be
sure to note the orientation of the holes on
the narrow faces of the boards. Also note the
position of the holes offset from the center on
the wide face of the Long Inside and Long
Outside Posts.
Try to align all of the holes along each board
for future attachments.
C
AS
AR
BT
AI
AJ
BA
BA
Read all of the instructions before starting assembly.
To avoid backtracking, review the first 15 steps to make sure
that the components face the proper direction before assem-
bling the posts.
view from the
front of the set.
All 1/4 x 2-1/2" Hex
Bolt Assemblies
All 1/4 x 2-1/2" Hex
Bolt Assemblies
All 1/4 x 2-1/2" Hex
Bolt Assemblies
view from the
front of the set.
view from the
back
of the set.
Note: It will take two to three days for one person
to assemble this project.
