11.
Install the replacement processor.
a. If necessary, remove the processor from its packaging. Carefully remove the protective cover from the
bottom side of the processor, taking care not to touch any contacts.
b. Orient the processor with the socket so that the processor cutouts match the four orientation posts on the
socket.
c. Note the location of a gold key at the corner of the processor.
d. Carefully place (DO NOT drop) the processor into the socket. Hold the processor down with your finger as
you release the vacuum pencil.
12.
Close the load plate. Carefully lower the load plate down over the processor.
13.
Lock the load plate.
a. Push down on the locking lever marked with the "Lock (1)" symbol.
b. Slide the tip of the lever under the notch in the load plate. Make sure the load plate tab engages under
the socket lever when fully closed.
c. Repeat the steps to latch the locking lever on the other side. Latch the levers in the order shown.
Motherboard, Processor and DIMM Replacement
HR90-2009
37
CS400-AC Hardware Replacement Procedures
Install Replacement Processor