3.
Carefully unseat the bracket and drive assembly from the connector on the node IFB and remove the
assembly from the chassis.
4.
Remove the four screws that attach the HDD to the drive bracket. (Screws could be through the top or side of
the bracket depending on the HDD model.)
5.
Remove the HDD from the drive bracket.
Installation
6.
Install the replacement HDD and attach it to the drive bracket with the four M3 x 4.0 screws.
7.
Position the HDD bracket assembly in the base of the chassis. Then seat the drive to the connector on the
node IFB.
8.
Attach the HDD bracket assembly to the chassis (one 6-32 x 0.25 screw).
GB522X Replacement Procedures
HR90-2009
22
CS400-AC Hardware Replacement Procedures