GreenBlade
COM
Installation
1.
Slide the GB522X into the subrack, and carefully push it in until it seats with the midplane connectors.
2.
Power on the GB522X and verify that the blue LED lights to indicate power is applied to the blade.
3.
Connect the cables to the GB522X, boot the operating system, and close the rear doors of the cabinet.
GB522X Cover Removal
1.
Remove the screw that secures the cover to the chassis. Refer to the following figure.
2.
Press down on the latch button and slide the cover toward the rear of the chassis.
3.
Lift and remove the cover.
TO
WARD
THE REAR
GB522X Replacement Procedures
HR90-2009
15
CS400-AC Hardware Replacement Procedures