There are three 6-32 x 0.5 inch screws and one 6-32 x 0.25 inch screw.
5.
Carefully remove the mounting bracket and HDD/SSD from the chassis.
6.
Remove the four screws that attach the HDD/SSD to the mounting bracket.
7.
Remove the HDD/SSD from the mounting bracket.
Installation
8.
Install the replacement HDD/SSD and attach it to the bracket with the four M3 x 4.0 screws.
9.
Attach the high-mount bracket/drive assembly to the chassis.
10.
Connect the SATA signal and power connectors.
GB522X HDD Replacement (First Generation Chassis)
Removal
1.
Remove the GreenBlade chassis from the subrack and place it on a stable ESD-safe work surface. Remove
the cover.
2.
Remove the screw that attaches the drive bracket to the base of the chassis.
GB522X Replacement Procedures
HR90-2009
21
CS400-AC Hardware Replacement Procedures