Operators Manual
5
A FRESH APPROACH TO VENDING
7.
All Models: Rotate soluble/freshbrew ingredient canister outlets to upright position.
Remove the milk canister from the machine and remove
the lid. Place the canister into the canister filling station
located on the door (a) and fill canister with correct
ingredient.
DO NOT place the canister on the floor or overfill with
ingredient.
Carefully remove the canister from the filling station and
replace the lid. Refit canister into machine ensuring that
it is returned to correct operating station.
Repeat this operation for all soluble/freshbrew ingredient
canisters fitted to the machine. Rotate the canister outlets
to their correct operating positions.
8.
Press the Cup Test button (7), located in the Service
Keypad on the rear of the door and ensure that a cup is
ejected cleanly from the cup drop unit.
9.
Press the Park Head button (8), located in the Service
Keypad on the rear of the door and ensure that the
dispense head moves to its fully extended position.
Press the button again to return the dispense head to its
correct (homed) position.
10. If fitted, check that the coin mechanism and cash box
operate correctly. To do this, swing the cover away from
the door (b). Fill the coin tubes with correct coinage.
Ensure coin return mechanism functions correctly.
11. Operate the machine through its complete range of
selections to ensure that each vend is correctly
dispensed. Follow the instructions detailed in Service
Keypad Functions for making a vend using the Test
Vend button (6).
12. Close the cabinet door. Ensure that the machine is left
in a clean and safe condition.
2.5 Warranty card
Please complete and return the warranty card that comes with the machine. Use the card to note
any problems you encountered during installation, your feedback helps us to improve our products
and services. Return the warranty card, whether problems were encountered or not, failure to may
invalidate your warranty.
Se
ctio
n
2
-In
sta
lla
tio
n
(E
ng
ine
erʼs
Pro
ce
du
re)
a
b
