INFINITY
34
AUTOBAR
Printer Baud Rate
This allows the operator to set the correct baud rate for a serial printer if one is to be used. It is
important for this to be set correctly to ensure successful data transfer. To change the Printer Baud
Rate see 6.4 Entering or Updating Parameters.
When complete, press Up One Level twice to return to the System Settings menu screen.
7.6.4 Software Version
The Software version menu displays the version number of the
software installed and is for information only.
Navigate: System Settings / Software Version. The LCD will
display the screen as shown.
7.6.5 Temperature Units
This menu allows the operator to change the way that the temperature is displayed, either °C or
°F, on the LCD when the machine is in standby mode. To change the way that the temperature is
displayed, proceed as follows:
1.
From the System Settings menu, select
Temperature Units. The LCD will display the screen
as shown.
N.B. By default Temperature Units are factory set to
°C.
2.
To change °C to °F, select Fahrenheit. A filled radio
button indicates that it is selected.
3.
To save the new parameter to the machines memory and return to the System
Settings screen, press Up One Level.
7.6.6 Idle Screen Options
This menu allows the operator to configure the LCD so that it displays either the time or the time
and water temperature with the standby message when idle. To configure the idle screen options,
proceed as follows:
1.
From the System Settings menu, select Idle
Screen Options. The LCD will display the screen as
shown.
2.
Select the required option, eg Time and
Temperature. A filled radio button indicates that it is
selected.
3.
To save the new parameter to the machines memory
and return to the System Settings screen, press Up
One Level.
Se
ctio
n 7
- O
pe
rato
rʼs
P
rog
ram
