INFINITY
32
AUTOBAR
To set a standard time-zone by GMT:
1.
Navigate: System Settings / Clock / Daylight Saving Time / Select Standard Time-
zone. The LCD will display the screen as shown.
in the following example the machineʼs time-zone is set appropriately for Central
European Time (GMT +1) with daylight saving applied (Central European Summer
Time).
2.
From the list displayed, select GMT+1. A filled radio button indicates that it is selected.
3.
To save the new parameter to the machines memory and return to the Daylight Saving
Time screen, press Up One Level.
4.
When complete, press Up One Level twice to return to the System Settings menu
screen.
7.6.3 DTS
Entry into this menu allows the operator to configure the machine in order to send audit data
relating to sales and events, stored in the machines memory, to a data carrier or other device.
Data Transfer Standard (EVA-DTS) - Overview: The standard makes it possible to transfer
information from vending machines/payment systems to PC-based accounting/management
systems and/or the opposite way. It is important that all suppliers of vending machines and
payment systems agree to a common standard for the Electronic Data Transfer, because only this
way the operator can be sure that all his equipment can be read out and programmed by means of
the same handheld terminal.
Navigate: System Settings / DTS (DTS Standby Mode, DTS Audit List, CA304 Data Type, Data
Reset Mode, Event Reset Mode, Printer Baude Rate, Passcode Reset).
DTS Standby Mode
The first sub-menu, DTS Standby Mode, is displayed with its current state (DDCMP). The machine
is factory set to enable data transfer via the optical DDCMP link. To change this to the DEX
setting:
1.
Select DTS Standby Mode.
Se
ctio
n 7
- O
pe
rato
rʼs
P
rog
ram
