INFINITY
30
AUTOBAR
2.
To update the machineʼs identification, select Machine ID. Update the entry using the
appropriate touch-keys. To save the new parameter to the machines memory and
return to the Machine Information screen, press Save.
3.
To update the machineʼs location, select Machine Location. Update the entry using the
appropriate touch-keys. To save the new parameter to the machines memory and
return to the Machine Information screen, press Save.
3.
When complete, press Up One Level to return to the System Settings menu screen.
7.6.2 Clock
The current date, time and timezone (inc. daylight saving) are held in the machineʼs memory. This
menu allows the operator to set/update these settings via 3 separate sub menus.
N.B. The machine can display the current time in either 12 or 24 hour format.
To update the time:
1.
Navigate: System Settings / Clock / Time. The LCD will display the screen as shown
below. By default the time is displayed in 24 hour format (e.g. 8:52 is 8:52am). To
display the time in 12 hour format, press Switch To 12h Mode.
2.
To advance the hour or minute, press the appropriate [+] (far left for the hour, far right
for the minute). To decrease the hour or minute, press the appropriate [–].
e.g. To update the time displayed (8:52am) to 9:52am press [+] once only, using the
coresponding touch-key.
3.
To save the new time to the machines memory and return to the Clock screen, press
Save. To return to the Clock screen without saving the changes, press Previous Page.
Confirm that the status line at the bottom of the screen displays the correct time.
To update the date:
1.
Navigate: System Settings / Clock / Date. The LCD will display the screen as shown
over. By default the date is displayed in ʻDD Month YYYYʼ format (e.g. 29 March 2010).
Se
ctio
n 7
- O
pe
rato
rʼs
P
rog
ram