Crane Merchandising Systems Autobar INFINITY Operator'S Manual Download | Manualshive

Page: 33 / 48

background image

Operators Manual

29

A FRESH APPROACH TO VENDING

2.

To disable SureVend™, select Disabled. A filled

radio button indicates that it is selected.

3.

To save the new parameter to the machines memory

and return to the Product Configuration screen,

press Up One Level.

7.4.4 Cup Mechanism
This menu enables the cup drop unit to be switched on or off, the default is On. This is for users

who wish to vend drinks into their own cups. SureVend

TM

still monitors the cup station and will not

dispense drinks without a cup in the dispense area.

1.

Navigate: Product Configuration / Cup

Mechanism.

2.

To disable Cup Mechanism, select Off. A filled radio

button indicates that it is selected.

3.

To save the new parameter and return to the

Product Configuration screen, press Up One

Level.

7.5 Free Vend

This menu allows the operator to enable/disable Free Vend when the machine is fitted with a

coin/card mechanism. When Free Vend is enabled, all available drinks selections can be

dispensed at no cost. To enable Free Vend, proceed as follows:

1.

From the Operatorʼs Main Menu screen, select:

Free Vend.
N.B. By default Free Vend is factory set to disabled.

2.

To enable free vend, select Enabled. A filled radio

button indicates that it is selected.

3.

To save the new parameter to the machines memory

and return to the Operatorʼs Main Menu screen,

press Up One Level.

7.6 System Settings Menu

This menu allows the operator to view information relevant to the machine and its location, set the

current time and date, set and view DTS information, backup and restore machine software, view

the machine and I/O board software versions installed in the machine and set temperature and idle

screen display options.
7.6.1 Machine Information
This sub-menu allows the operator to view the identification for the machine and its location.

1.

Navigate: System Settings / Machine Information (Machine ID, Machine Location,

Manufacturer ID, Model Number, Serial Number, Machine Serial Number).
Information for the items: Manufacturer ID; Model Number; Serial Number; Machine

Serial Number, are displayed directly on the Machine Information menu screen but

cannot be updated.

Se

ctio

n 7

- O

pe

rato

rʼs

P

rog

ram

«
...
31
32
33
34
35
...
»

Summary of Contents for Autobar INFINITY

















































Reviews:

No comments

Related manuals for Autobar INFINITY

Brand: Toyota Pages: 39

Brand: GBC Pages: 120

Brand: Sinbo Pages: 48

Minoltafax 1400

Brand: Konica Minolta Pages: 157

Brand: Singer Pages: 34

Brand: Singer Pages: 24

3100 SERIES 569U

Brand: Singer Pages: 22

Brand: Unicorn Pages: 28

Brand: GBC Pages: 38

Brand: Panasonic Pages: 2

Brand: Panasonic Pages: 19

Brand: Panasonic Pages: 16

Brand: Panasonic Pages: 36

Brand: Panasonic Pages: 36

Brand: Panasonic Pages: 40

Brand: Panasonic Pages: 44

Brand: Panasonic Pages: 48

Brand: Panasonic Pages: 56

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands