13
Craftmatic
®
L-132 290-0001-b
TWIN SIzE HEADBOARD BRACkET ASSEMBLIES
ARE SHOWN
(FIgUrE 7).
qUEEN SIzE HEADBOARD
BRACkETS ARE EqUIPPED WITH ANGLE BRACES.
NOTE
instaLLation
Typical Craftmatic
®
adjustable base installation is now complete.
steP 11
Install mattress on adjustable base.
g. When installing a headboard, footboard, or four-piece surround (case
good), allow for 1.5 inches (38.1mm) to 2 inches (50.8mm) of
clearance at the head and foot of the bed and a minimum of ½ inch to
¾ inch on the sides.
h. Firmly tighten the 3 inch carriage bolts of both headboard bracket
channels.
i. Measure the center-to-center distance between the mounting slots of
the headboard bracket flanges (
FIGURE 7
).
j. If bracket flange adjustment is required to accept the headboard,
remove the 1 inch long hex head bolts and move flanges side-to-side
for the adjustment (
FIGURE 7
). Reinstall bolts. Tighten all headboard
mounting bolts.
k. Install headboard.
FIGURE 7
SLIDE BRACKET
ASSEMBLIES IN OR
OUT TO ACHIEVE
POSITION
1 INCH LONG HEx
HEAD BOLTS/NUTS
HEADBOARD
BRACkET FLANGE
