Craftmatic
®
L-132 290-0001-b
8
instaLLation
steP 2
Carefully lift the base frame from the shipping carton, keeping the unit
top-side-down.
steP 3
Install (4) legs into the base frame. Simply screw each leg into a tapped
hole at each corner of the base frame (
FIGURE 1
). Insert casters into the
bottom of each bed leg, if applicable.
steP 4
Remove and extend out power cord from the protective packaging.
POWER CORDS MUST NOT INTERFERE WITH
ANY ADjUSTABLE BASE
MECHANISMS.
WARNING
LEGS – SCREW INTO
TAPPED HOLE AT
EACH CORNER
FIGURE 1
CASTERS – PRESS-FIT
INTO BOTTOM OF LEGS
(IF APPLICABLE)
