21
Craftmatic
®
L-132 290-0001-b
CONTROL BOx
CONNECTION CORD
CONNECTED TO
POWER DOWN DEvICE
FIGURE 14
steP 6
Press the FLAT BUTTON on the remote control until the base is in
the flat position. BASE WILL MOVE TO THE FLAT POSITION VERY
SLOWLY.
Note: Batteries in the power down device will only work for
one use, then will need to be replaced.
steP 7
Reconnect control box connection cord to power supply “brick” and
plug main power cord into electrical power source (
FIGURE 15
).
When power is restored from outage, base is ready to resume normal operation.
ELECTRICAL
POWER
SOURCE
MAIN
POWER
CORD
FIGURE 15
Power down oPeration
