9
Craftmatic
®
L-132 290-0001-b
instaLLation
steP 6
Plug electrical power cord into a working, grounded electrical outlet.
Note: an electrical surge protection device is recommended (not included).
steP 7
Install batteries in remote control (2-AAA size, included) (
FIGURE 3
).
Briefly activate all functions of the base with the remote control to verify
all features are in working order. If base does not operate, refer to the
Troubleshooting
section of this manual.
steP 8
Return base to the level position.
FIGURE 3
TAB
BATTERY
COMPARTMENT
DOOR
SLOT
PRESS IN ON BATTERY
COMPARTMENT DOOR AND
SLIDE DOWN TO REMOvE.
INSERT TAB IN TAB SLOT
AND SNAP IN TO REPLACE.
steP 5
Remove the plastic packaging from the base frame.
Carefully rotate the adjustable base over to position the
base so it is resting on its legs (
FIGURE 2
).
FIGURE 2
HEAD END
OF BASE
4-PORT CHARGING HUB
(located on each side of
base, for charging low-
voltage devices only)
AT LEAST TWO PEOPLE ARE
RECOMMENDED FOR HANDLING AND
MOvING ADjUSTABLE BASE.
WARNING
WARNING
