SINGLE HEAD - USER MANUAL V1.2
12
4. FIRST STEPS
4.1. The printer wizard
The first time you turn on the printer, the printer wizard
will appear. The wizard will walk you through the steps
needed to set up and calibrate the printer:
•
Language
•
Time zone
•
Firmware update
•
Network (LAN/Wi-Fi)
•
Calibration
If you are unsure, you can always run the printer wizard
later from the settings menu.
Language
1.
Select your language from the list
2.
Then press Next
Time zone
1.
Select your time zone from the list
2.
Then press Next
Firmaware update
1.
Please don’t skip this step!
2.
Download the latest Firmware for the FLOW 3D
printers at https://craftbot.com/firmware
3.
Copy
CRAFT_UPDATE.ZIP
to a FAT32 formatted USB
drive
4.
Plug the USB drive you found in the accessories box
into the HMI port
5.
Wait for the firmware update to complete
Network setup
1.
Please name your printer. This name will help you
identify the printer on the network.
2.
Select the Ethernet or the WiFi network. The printer
can use either Ethernet or WiFi. If you select the WiFi
option the printer will turn off the Ethernet and vice
versa.
3.
If you selected the Wi-Fi menu, the wizard will go to
the Wi-Fi menu. (hidden SSID network cannot be
used)
4.
Static IP or DHCP options: if DHCP is selected the
printer will restart.
◊
The Search button will list the available Wi-Fi
networks. Make your choice and enter the
password using the keyboard.
