Coronis MDCC 2121, Getting Started Manual

Page: 49 / 94

Cable routing
49
Cable routing
To route the cables:
Figure 28: Display rear view
1.
Bind the cables in the connector compartment together with the
cable tie inside the connector compartment.
2.
Route the cables alongside the neck and in the cable ducts in
the tilt & swivel foot. See figure 28 above.
3.
Re-attach the connector compartment cover and neck cover.
Close the cable duct covers. Push the cable duct covers upward
to lock them.
To route the cables:
1.
Bind the cables in the connector compartments together with
the cable ties inside the connector compartments.
2.
Re-attach the connector compartment covers.