Coronis MDCC 2121, Getting Started Manual

Page: 41 / 94

Dual-head installation
41
Dual-head installation
To attach the panel units to the dual-head stand:
1.
Take the stand from the packaging and put it on a solid flat
surface.
Figure 18: Dual-head stand
2.
Unpack the panels.
3.
Slide the display brackets on the stand arms in the correct
position. The correct position is indicated on a label on the rear
of the panels. There is a measure for portrait orientation and one
for landscape orientation.
Position both display brackets so that the indicator on the
brackets corresponds to the measure on the label.
Secure them with the supplied Allen key.