Coronis MDCC 2121, Getting Started Manual

Page: 39 / 94

Single-head installation
39
Single-head installation
To attach the panel unit to the display stand:
1.
Take the display stand from the packaging and put it on a solid
flat surface.
2.
Take the panel unit from the packaging and hold it in portrait
position. The I-Guard should be positioned bottom right.
3.
Hook the top gaps in the rear of the panel over the top anchors
of the stand attachment plate (1). see figure 17.
4.
Push the bottom of the panel firmly towards the stand so that
the bottom anchors clip in the bottom gaps (2).
5.
Check that the panel is
firmly attached
to the stand.
Figure 17: Attaching the panel to the display stand
1
2
1
2
3
4