Corghi Artiglio Master 28, Operator'S Manual

Page: 51 / 84

Artiglio Master 28
Operator’s manual 133
EN
4. Connect the Doyfe connector of the inflating hose to
the valve stem (Fig. 40c).
5. Press the pedal to inflate the tyre at short
intervals. Frequently check the pressure on the pressure
gauge (1, Fig.40d) to make sure that the pressure
NEVER exceeds the maximum pressure indicated by
the manufacturer on the tyre. The tyre widens and the
beads are positioned.
If necessary:
6. Continue with inflation to the maximum value of 3.5
bar to correctly position the tyre on the rim. Avoid
distractions during this operation, and continually check
tyre pressure on the air pressure gauge (1, Fig. 40d)
to prevent excessive inflation. Inflating tubeless tyres
requires a higher air flow rate to allow the beads to
overcome the HUMP rim - see types of rim profiles for
mounting without an air chamber in Fig.40e
7. Check that the beads are correctly inserted in the rim;
otherwise, deflate the tyre, break the beads as described
in the relevant section, lubricate and turn the tyre on
the rim. Repeat the mounting operation described
previously and check again.
8. Reinsert the internal valve mechanism.
9. Bring the pressure to the operating value by pressing
the inflation button (2, Fig. 40d).
10. Place the cap back on the valve.
40b
40c
1
2
40d
“HUMP” (H)
“double HUMP” (H2)
40e