Corghi Artiglio Master 28, Operator'S Manual

Page: 34 / 84

116
Artiglio Master 28
Operator’s manual
RISK OF INJURY
Before using the machine: Disconnect the power supply Fig. 25;
Isolate the compressed air line by disconnecting the supply hose (quick-release
connector) Fig. 25A
25
25A
CAUTION
In order to prevent damage or involuntary movement of the machine, it is
recommended to only use original Corghi spare parts and accessories.
CAUTION
6.1. PRELIMINARY CHECKS
Check that there is a pressure of at least 8 bar on the filter regulator pressure gauge.
If the pressure is below the minimum level, some machine operations may be limited or
insufficient.
After the correct pressure has been restored, the machine will function
properly.
Check that the machine has been adequately connected to the electric
mains and the pneumatic supply.
6.2. TURNING THE MACHINE ON
Turn the main switch (Fig. 26) to position -1- (ON).
After turning on the machine, “Att” will appear on the
screen (see Fig. 27).
Press any of the numerical value input keys on the keyboard
to reset the machine.
27
26