Corghi Artiglio Master 28, Operator'S Manual

Page: 32 / 84

114
Artiglio Master 28
Operator’s manual
7 - Head movement control lever.
Area C – Rim diameter display and rim diameter configuration keyboard
8 - Display showing the rim diameter
The number displayed has two digits with a decimal
separator.
9 - Keyboard for rim diameter configuration
The keyboard is divided into:
- keys for entering numerical values for the unit. Use the
keys to enter unit values, increasing (+) or decreasing (-)
them;
- keys for entering decimal numerical values. Use the
keys to enter the values, increasing (+) or decreasing
(-) them.
5.4.c. PEDAL UNIT
1 - Inflation pedal.
2 - Turntable rotation pedal.
The pedal has 4 different operating positions, each
corresponding to a rotation speed.
- pedal raised (unstable position): slow anticlockwise rotation.
If the pedal is kept raised for more than 4 seconds, rotation
gets faster (always anticlockwise)
- pedal in the rest position (stable position): turntable stopped
- pedal gently pressed downwards (unstable position): slow clockwise rotation
- pedal pressed entirely downwards (unstable position): fast clockwise rotation
PEDAL UNIT (“AUTOMATIC” VERSION)
3 - Wheel locking/unlocking pedal.
The automatic version features a third pedal.
Pressed to release the system which locks the turntable
centring handle. In its rest position, the system which clamps
the turntable centring handle is normally active. The pedal
is used during positioning and clamping of the wheel on the
turntable, and to release the wheel when the job is done.
1
2
22
3
22a
C
8
9