Corghi Artiglio Master 28, Operator'S Manual

Page: 36 / 84

118
Artiglio Master 28
Operator’s manual
Wheels with pressure sensor - Fig.28D. To work
correctly on these wheels and avoid damaging the
sensor (which can be incorporated in the valve,
secured to the belt, glued inside the tyre, etc.) suitable
mounting/demounting procedures must be observed
(refer to “Approved mounting/demounting procedure
for runflat and UHP tyres”).
Remove the old weights from the rim before starting work operations.
CAUTION
6.4. WHEEL LOADING
CAUTION
Press the lifter pedals only during the wheel loading/unloading phases.
Never press them during other work phases!
- Press the DOWN pedal to move the lifter to the loading position (Fig. 30).
- Load the wheel onto the lifter (Fig. 30) then press the UP pedal. The wheel will be lifted
and positioned horizontally on the turntable (Fig. 31).
- Press the UP pedal again. The lifter will lower and place the wheel on the turntable.
A
B
C
28D
30 31