Corghi Artiglio Master 28, Operator'S Manual

Page: 23 / 84

Artiglio Master 28
Operator’s manual 105
EN
3.1. LIFTING/HANDLING
To lift the machine from the pallet, remove the
screws from the fixing foot (A, Fig. 6) and secure it
using the hoisting bracket (B, Fig. 6).
This lifting point must be used whenever you need to
change the position of the machine. Do not attempt
to move the machine until it has been disconnected
from the power and pneumatic supply networks.
3.2. INSTALLATION
- Remove the hoisting bracket by loosening the
screw and the relevant washer (Fig. 6a).
- Remove the pressure gauge holder cover from its
packaging.
- Connect pipeline (A, Fig. 7) to union (B, Fig. 7).
- Place the cover on the tyre changer and secure
the upper part using the 3 M6 screws (C, Fig. 8).
- Fix the cover laterally using the 2 M4 screws (D,
Fig. 9)
- Remove the bead pressing unit from the packing.
- Place the spacer of the bead pressing tool support
correctly on the tyre changer (see Fig. 10)
- Place the bead pressing tool support on the
6
A
B
6a
7
A
B
8
C
9
D