Corghi Artiglio Master 28, Operator'S Manual

Page: 19 / 84

Artiglio Master 28
Operator’s manual 101
EN
1.2.e. AIR PRESSURE
The machine is equipped with an internal pressure limiting valve to minimize the risk
of over inflating the tyre.
•
RISK OF EXPLOSION
•
Never exceed tyre pressure recommended by
tyre manufacturer. Always match the tyre and rim
dimensions.
•
Take care to avoid any injuries.
DANGER
1. Never exceed these pressure limitations:
• The supply circuit pressure (from the compressor) is 220 psi (15 bar) .
• The operating pressure (indicated on the regulator) is 150 psi (10 bar) .
• The tyre inflation pressure (displayed on the pressure gauge) must never exceed the
pressure indicated by the manufacturer on the sidewall of the tyre itself.
2. Activate the air inflation jets only when inserting the bead.
3. Discharge the air pressure system before disconnecting the power supply or other
pneumatic components. Air is stored in a reservoir to operate the inflation jets.
4. Activate the air inflation jets only if the rim is correctly clamped on the tyre changer
(if required) and the tyre is completely mounted.
1.3. ADDITIONAL RIM/TYRE INFORMATION
Wheels equipped with pressure sensors and special rims or tyres could require
particular work procedures. Consult wheels and tyre manufacturer’s service
manuals.
CAUTION
1.4. INTENDED MACHINE USE
This machine must only be used to demount and mount vehicle tyres from/on the rims,
using the provided tools. Any other use is improper and may result in injury.
The machine is not designed for working with motorcycle wheels.