Corghi Artiglio Master 28, Operator'S Manual

Page: 49 / 84

Artiglio Master 28
Operator’s manual 131
EN
6.12. TYRE INFLATION
6.12.a. SAFETY REGULATIONS
RISK OF EXPLOSION
Never exceed the pressure recommended by the tyre
manufacturer. Never mount tyres on rims with a different
diameter.
An exploding tyre can cause personal injury or death.
DANGER
Check that both the upper and lower beads and the rim bead seat have been suitably lubricated
with paste appropriate for mounting.
Safety goggles with plain lenses and safety footwear must
be worn.
Clamp the rim on the turntable during inflation.
Remove the valve core if it has not already been removed.
Connect the inflation line to the valve.
Press the pedal to inflate the tyre and make the beads
adhere. Stop frequently to check the internal tyre pressure
on the pressure gauge.
Proceed with caution to prevent any injuries. Carefully read, understand and observe
the following instructions.
CAUTION
1. Overinflated tyres can explode, producing hazardous flying debris that may result in an
accident.
2.
Tyres and rims that do not have the same diameter are
“mismatched”. Never attempt to mount or inflate any tyre and
rim that are mismatched. For example, never mount a 16” tyre
on a 16,5” rim (or vice versa). It is very dangerous. Tyres and
rims that do not correspond could explode and cause accidents.
3.
Never exceed the inflation pressure for the tyre indicated by
the manufacturer on the side of the tyre itself.
Carefully check that the air hose is well inserted in the valve.
4. Never bring your head or other body parts close to a tyre during
inflation or bead insertion operations.
39