Corghi Artiglio Master 28, Operator'S Manual

Page: 47 / 84

Artiglio Master 28
Operator’s manual 129
EN
8 - Operate the lever by lowering the
tool and manually adjusting the tyre into
position (Fig. 38e).
9 - Push the tyre under the shoulder level
(Fig. 38e).
10- Use the bead pressing tool (Fig. 38f) and, if
necessary, bead pressing clamps (Fig. 38g) on
the rim shoulder, ensuring that the upper bead is in the channel.
11- Press the pedal to start rotation until the second bead has been mounted.
Proceed with caution to prevent any injuries. Make sure the top bead is correctly
inserted in the rim channel, throughout the entire mounting stage.
CAUTION
12- Remove the bead pressing clamps or the bead pressing tool.
13-
Return the bead breakers to the top and bottom ends (Fig. 38h).
Proceed with caution to prevent any injuries. Ensure that the top bead is correctly
loaded on the tool before carrying out mounting (Fig. 38G).
CAUTION
38e
A
38f
38g