English
• Eco mode
Eco, which means the Comfort Modetemperature minus 3.5°C. This
enables you to lower the temprature without having to reset the Comfort
Mode temperature. Select this mode for short-term absences (between 2
and 24h) or during the night
• Frost protection mode
This mode enables you to protect your home against the effects of cold
weather (frozen, pipes, etc.), by maintaining a minimum temperature of
7*C in it at all times. Select this mode when you will be away from your
home for a long time (more than 5 days).
11.4 Boost feature
Important:
the Boost mode can be enabled at any time, whatever the
current operating mode (Auto, Comfort, Eco or Frost protection)
To activate Boost mode, press
the desired temperature setting will
be set at maximum for the time period you request. 60 minutes display
will flash by default.
• First press: Boost
Durante il primo minuto: appaiono il simbolo boost e l'indicatore di
riscaldamento, il cronometro della durata lampeggia.
During the first minute, you can modify the Boost duration from 0 to the
maximal authorised duration of the Boost, such as defined during the
user settings by intervals of 5 minutes (or more quickly by push superior
to 2 seconds) by pressing
and
.This modification will be saved
and effective for the next Boost. After 1 minute, the Boost count begins and
the time is running, minute by minute.
Note:
After 1 minute, you can modify temporarily the duration: it will be valid
only for this active Boost and therefore non-recurring.
The Boost can stop for 2 different reasons:
- An order "Stop" has been sent by your energy manager through the
pilot wire:
The device stops, -- appears. The cursor moves above auto. When the order
Comfort will be sent, the device will be restarted until the count end.
If the ambient temperature reaches the maximal Boost temperature
during the count:
The device switches off but the Boost mode is always active : the count
is always displayed, the Boost symbol and the heating indicator flash on
the display. When the temperature drops under the maximal authorised
temperature, the device will be restarted until the count ends.
• Second press: Boost cancellation
The cursor moves above the previous active mode and the setting
temperatura appears.
11.5 Gauge consumption, energy savings
In the device display, an indicator shows the energy comsumption level
by positioning in front of the colour: red, orenge or green. You can choose
your level of energy usage, depending on the setting temperature. As
the temperature setting increases, the consumption will be higher. The
gauge appears in Auto, Comfort, Eco and Frost protection modes and
whatever the temperature level.
C - Red colour
High Tempe-
rature level: it
is advisable to
significantly re-
duce the setting
temperature.
Setting teperature
> 22°C
When the setting
temperature is higher
than 22°C
B - Orange
colour
Average tempe-
rature level: it
is advisable to
slightly reduce
the setting tem-
perature.
19°C <Setting
teperature ≤ 22°C
When the setting tem-
perature is higher than
19°C and lower or equal
to 22°C
A - Green colour
Ideal settings.
Setting teperature
≤ 19°C
When the setting tempe-
rature is lower or equal
to 19°C
11.6 Setting the Comfort mode temperature
You can access the Comfort temperature set up from the Auto and
Comfort Modes. It is preset to 19°C. Using
and
you can adjust
the temperature from 7°C to 30°C by intervals of 0.5°C.
- 25 -
Cod. 1910000000276 - nv01
Summary of Contents for CLAUDIA EL.
Page 20: ...20 Cod 1910000000276 nv01...
Page 38: ...38 Cod 1910000000276 nv01...
