English
• Activation/deactivation of the PIN code
1-
appears on the display.
Press
or
to enabled PIN code.
appears on the display.
= PIN code enabled
= PIN code disabled
2- Press
to save and return to the home installer settings display.
The PIN code is enabled. Any modification of reserved settings listed in
"Overview" is now impossible.
• Customizing the PIN code
If you have just activated the PIN code, follow the steps described below.
Alternatively, you must copy the steps 1 and 2 of the initialisation process
as well as the steps 1 and 2 of the activation process before personalising
the PIN code.
Please remember that the personalisation of the PIN code can only be set
once the initialisation and activation of the PIN code has been completed.
1- When
appears, press
for at least 5 seconds.
5 sec.
2- The 0000 code appears and the first number blinks. Press
or
to select the first desired number then press
to save. Repeat this
operation for the remaining 3 numbers.
1
2
3- Press
to confirm. The new code is now saved.
4- Press again on
to exit setting PIN code mode and go back to the
home display of the installer settings.
To exit the installer setting, press
twice.
13.4 Restoring factory settings
If the PIN code protection is disabled, the user and installer settings are
reinitialized:
1- From the PIN code setting, press
.
appears briefly on the
display
2-
Appears . Press
or
to select
.
= Factory settings reset.
= Factory settings not reset
- 33 -
Cod. 1910000000276 - nv01
Summary of Contents for CLAUDIA EL.
Page 20: ...20 Cod 1910000000276 nv01...
Page 38: ...38 Cod 1910000000276 nv01...