Cordivari CLAUDIA EL., User Manual, Page: 26 / 56

English
Note: you can limit the Comfort temperature.
11.7 Consumption indication accumulated in KWH, energy savings
It is possible to see the estimation of energy consumption in KWH since
the last reset of the energy meter.
• Display of the estimated power consumption
To see this estimation, from Auto, Comfort, Eco or Frost protection mode,
then press
. To exit the display mode of consumption: press or
, the device returns automatically in the previous active mode.
1 2 3 4 5 6 7
• Resetting the energy meter
To reset the energy meter, from Auto, Comfort, Eco or Frost protection
mode, then proceed as follows.
1- Press
.
2- Press simultaneously and for more than 5 seconds. To exit
resetting the energy meter, press or , the devices returns
automatically in the previous active mode.
11.8 Child anti-tamper, keypad lock/unlock
• Keypad lock
To lock the keypad, press and hold the and buttons for 10
seconds. The padlock symbol appears on the display, the keypad is
locked.
3
• Keypad unlock
To unlock the keypad, press and hold the and buttons for 10
seconds again. The padlock symbol disappears from the display, keypad
is unlocked. when the keypad is locked, only the button (or switch) is active
. If the device is on Standby mode when the keypad is locked, you have
to unlock it for the next heating on to access the setup.
11.9 7 day and daily programme integrated, energy savings
In questa modalità è possibile programmare il dispositivo impostando uno
dei cinque programmi proposti per ogni giorno della settimana.
• Access to the programming mode
From Auto, Comfort, Eco or Frost protection mode, press for 5 seconds
to enter into the programming mode.
Schematic sequence of programming settings:
Setting time Setting day
Programmes
choice
• Setting day and time
In this mode, you can set day and time to programme your device in line
with your needs.
1- From Auto, Comfort, Eco or Frost protection mode, press for 5
seconds.The cursor moves to the setting day and time mode.
1
5 sec.
2- Select using or . The hours figures will flash. The hours will scroll
quickly if you hold the or buttons. Save by press .
1
1 2
3- The minutes figures will flash. Select using or . Save by pressing
.
1
1 2
4- The cursor above the number 1 (which represents the monday) will flash.
Select the day using
or . Save by pressing .
1
1 2
5- To change and/or allocate programmes, press . To exit the time and
day mode, press 3 times.
• Programmes choices
Schematic sequence of programmes:
Comfort Eco P1 P2 P3
Your device’s default setting is non-stop Comfort for 7 days a week.
• Programmes overview
- Your device will operate in Comfort mode, 24 hours a day, for wach day
selected.
Note: You can se the Comfort mode temperature to the temperature you
require (see the Setting the Comfort mode temperature section).
- P1: Your device will operate in Comfort mode from 06:00 to 22:00 (and in Eco
→ → → →
→ →
- 26 -
Cod. 1910000000276 - nv01